Sub-Zero Specialists EPA 608 Certified 1-Yr Parts · 180-Day Labor Warranty
Mon–Fri 8am–7pm · Sat–Sun 8am–4pm — (725) 237-7399
Call for service(725) 237-7399

Sub-Zero Flashing Display & Icons

Normal set-point flashing vs. alerts.

Updated October 2026 · By the Sub-Zero Repair Las Vegas service team · Technical details checked against Sub-Zero factory service documentation (sources)

Quick answer

A flashing number right after you press WARMER or COLDER is normal on Classic Sub-Zero models: the new set-point flashes for about ten seconds before the actual temperature returns. Other flashing items have specific meanings: a flashing bell means a door is open with the alarm enabled, a flashing SERVICE icon means a major fault, a flashing ice cube means the ice maker or water supply needs attention, and a flashing Pure Air icon means the air purifier cartridge is due.

What Is Flashing?

Flashing itemMeaning (Classic BI unless noted)More
Temperature number, right after pressing WARMER/COLDERNormal. The new set-point flashes at two-second intervals for ten seconds, then the current compartment temperature returns.—
Bell icon with a chime every two secondsA door has been open more than 60 seconds while the door ajar alarm is enabled.Door ajar
SERVICE iconA major fault was logged; with a chime, immediate attention is needed.Service icon
Single ice cube icon, no service iconThe unit and/or the water supply needs attention.Ice maker icon
Ice cube + SERVICEIce maker shut down after repeated water-valve events.No ice
Pure Air iconThe air purifier cartridge has reached its time limit (about 8,000 hours) or its light has failed.Air purifier

Why the Displayed Temperature Changes Slowly

Sub-Zero displays an averaged compartment temperature. Once set-points are reached, the shown temperature can change by no more than one degree per minute, even if air temperature swings more when a door is opened. A short spike while loading groceries is not a fault.

Display Showing Very Cold Numbers?

If the refrigerator shows something like 1–7° and the freezer -21 to -15°, Sub-Zero's troubleshooting guide notes the control is probably set to display Celsius. On Classic models the °F/°C setting can only be changed within the first minute after switching the unit on. See your use & care guide or call us.

What You Can Do

Safe for homeowners

  • Identify which icon is flashing using the table above.
  • Close the door fully if the bell is flashing.
  • Replace the air purifier cartridge if the Pure Air icon flashes, then hold PURE AIR for five seconds to reset.
  • For a flashing SERVICE icon, see the service icon page before calling.

Sources

  • Sub-Zero Built-In (BI) Classic Series Technical Service Manual, #7040317, Revision A, September 2015 — pp. 2-7 to 2-9, 2-20, 2-34 to 2-36, 7-13 to 7-14. Covers: BI-30U, BI-36U/UID/UFD/UFDID, BI-36F, BI-36R, BI-36S, BI-42S/SD/SID, BI-42UFD/UFDID, BI-48S/SD/SID, from serial #4380000.

Sub-Zero service manuals are written for certified technicians. We summarize them in our own words for homeowners and do not reproduce them. Procedures that involve electrical testing, the sealed system or refrigerant are intentionally left out of this page. Model coverage and serial ranges differ between documents, so always match your model and serial number. About our sources

Schedule Sub-Zero Repair in Las Vegas

$75 service call, credited toward your repair · 1-year parts · 180-day labor warranty · EPA 608 certified · Mon–Fri 8am–7pm · Sat–Sun 8am–4pm

Call (725) 237-7399
FAQ

Frequently Asked Questions

Why is the temperature on my Sub-Zero flashing?

If it happens right after pressing WARMER or COLDER, that is the new set-point being confirmed; it flashes for about ten seconds and then the actual temperature returns.

My Sub-Zero shows 3 degrees in the refrigerator. Is it freezing?

Probably not. Sub-Zero notes that very low readings like 1–7° in the refrigerator usually mean the display is set to Celsius.

Book Sub-Zero Service

Schedule Your Sub-Zero Repair

Call now for the fastest scheduling, or send a request and we'll call you back.

(725) 237-7399

Mon–Fri 8am–7pm · Sat–Sun 8am–4pm

  • ✔ $75 service call, credited toward your repair
  • ✔ 1-year parts & 180-day labor warranty
  • ✔ Upfront quote before any work begins
  • ✔ Sub-Zero parts in stock, so most repairs are finished on the first visit
  • ✔ EPA 608 certified sealed system repair
  • ✔ Repairs of any complexity on current and legacy models

Request Sub-Zero Service

Takes 30 seconds. We'll call to confirm your appointment.

Please enter your name.
Enter a 10-digit phone number.
Enter a 5-digit ZIP code.
Please choose an appliance type.
Please describe the problem (at least a few words).

Service area: the Las Vegas valley and Pahrump (Las Vegas, Henderson, North Las Vegas, Boulder City, Pahrump and nearby communities). By submitting, you agree to be contacted by phone or text about your service request. Privacy

Call Now Book Online